outborad oil change | Outboard Motor Oil

Beginners Guide to Outboard Motors Part 4

Winterizing your outboard motor is an important task that must be completed each year. If you don’t winterize your motor you could end up regretting it when the motor stops functioning or loses efficiency. Of all the regular maintenance you’ll end up performing this one is easily among the most important. It’s of particular importance to anyone living in a cold climate.

A good place to start your winterizing is with a fuel stabilizer. It stops fuel break down which can leave nasty deposits in your motors moving parts. You should also change the oil and replace the gear lube. When you’re done, disconnect the battery and give the motor a good inspection to make sure there are no missing or loose parts. Make sure that it’s free of debris and check the props for damage or anything that might interfere with successful operation. Follow these few simple steps and you’ll extend the life of your motor and make your time on the water that much more fun.

If you end up with a 2-cycle Evinrude replace the oil with Evinrude XD50 oil for optimal performance and reliability.

Did you like this? Share it:

Springtime Boat Prep

This week we’re going to be talking about getting your boat ready for the spring season. I know it’s still winter so maybe you’ll want to print this up and save it for later. Springtime is an exciting time for every outdoor enthusiast but it’s especially so for those of us who just can’t get enough of being on the water. The problem is, so many of us are so excited to get out on the water we forget to take the necessary steps to make our boating experience as fun and safe as possible.

With a few simple steps and our guide you can get out on the water with confidence this year and enjoy the rewards of proper maintenance and good safety practices. So stay tuned this week and we’ll show you how to get the best boating experience as quickly as possible when spring comes around next year. For Evinrude owners you can start early with Evinrude XD100 oil.

Did you like this? Share it:

How to Change Boat Motor Oil: Part One

Changing the oil in your boat’s engine is virtually guaranteed to be a messy and time-consuming chore, but it is essential to ensure high performance. For most boats, the manufacturer recommends changing the oil every 100 hours, which few boat owners actually do. There are a few different options when it comes to changing your outboard motor oil, and over the next few days, we will go through these processes step-by-step.

The first and most common way to drain your oil is through the drain plug. Start by placing a disposable container—a foil pan works fine—underneath the engine to catch the used oil. If you have limited space, you can attach a hose to the drain plug and transfer the oil into any container of your choosing. The main downfall to utilizing the drain plug is that it is often difficult to access and space to catch the oil may be limited.

Did you like this? Share it: