evinrude outboard oil | Outboard Motor Oil - Part 2

Winterizing Your Boat: Part One

Now that the summer boating season is winding down, it’s time to start thinking about putting your boat in storage for the fall and winter. You may assume that you can simply throw your boat on the trailer, put the cover on and let it sit for months on end. This may work for a season or two, but eventually this sort of neglect will begin to cause damage to your vessel.

It’s critical to take some time at the end of each season to make sure your boat is stowed properly. Not only will this improve its longevity, it will also make your job easier when it comes time to get it water-ready next spring. Over the next few days will go over the proper protocol for handling the cleaning, outboard motor oil removal and other crucial components of boat winterization.

Did you like this? Share it:

Basic Outboard Maintenance: Part One

The vast majority of outboard motor problems are easily preventable with proper care and routine maintenance. Flushing the engine after six hours of boating isn’t fun, but it will help you keep your engine performing in peak condition and extend its longevity. Although motor maintenance is a chore, it’s easy for virtually anyone with a tool kit.

Over the next couple of days, we’ll be covering some basic preventative care that should be done after every outing. We’ll also discuss some of the keys for long-term care, how to prepare the motor for storage, and some tips for protecting the unit during transportation. And we’ll go over the basics, including how to select and mix your outboard motor oil properly.

Did you like this? Share it:

Ole Evinrude: Father of the Outboard Motor

Ole Evinrude was born in Norway’s capital city of Oslo in 1877 but immigrated to the US with his family five years later. During his adolescence, Ole was sent to work in machinery stores and to teach himself engineering. He evolved into a machinist and worked at various firms around the Midwest.

Ole went into business for himself in 1900, and by 1907, he had built the first outboard motor. That original model was forged from brass and steel with a crank to get the two-cycle engine going. The business’ growth was steady after the conception of the motor until 1919, when Ole improved on his design, sold his stake in the old company and started anew. The Evinrude name has reached legendary proportions in the boating industry, and you’ll still find it plastered on everything for two-cycle motors to Evinrude XD100 oil.

Did you like this? Share it:

Mixing Gas and Outboard Motor Oil

Some people see mixing outboard motor oil and gasoline as a chore, but I actually prefer it. It beats having to change the oil the traditional way twice a year, in my opinion at least. Each two-stroke engine specifies a different fuel to oil ratio, so be sure to consult your owner’s manual; when I mix in my Evinrude XD100, I use a 50:1 ratio.

To figure out the proper combination, you first have to convert everything to a common unit of measurement—ounces are the easiest. There are 128 ounces in a gallon. So lets say you are going to prepare 5 gallons of mixed fuel, which is equivalent to 640 ounces. Since I use a 50:1 ratio, I divide 640 by 50 to get 12.8—so I need 12.8 ounces of outboard motor oil.

Did you like this? Share it:

What to Do When Your Engine Overheats: Part Two

If you see the temperature gauge rising, immediately turn the engine off and put up your warning flag for other boaters. Allow your boat to float freely for a few minutes; this will allow the engine to cool and let any debris that may be clogging the system to break free. While the engine is cooling down, open the hatch to the engine room, close the through-hull valve and inspect the strainer. If the strainer is clean, take a look in the through-hull valve to check for water flow into the strainer.

If you have no water flow your intake is clogged, which actually means you are in luck. Simply rid the obstruction from the system, put the strainer back in and you’re good to go. Of course, you will want to monitor the temperature gauge closely for the rest of the day. When you get back to the dock, thoroughly examine the engine to look for any extensive damage; I also recommend putting in some new Evinrude XD100 oil. Tomorrow will go over what to do if your engine problem is more than a simple clog.

Did you like this? Share it: