Seven Mile Bridge Rubble

While perusing the local Miami CBS affiliate, I came a cross a list of top places to fish in Florida. At the top of their list was Seven Mile Bridge Rubble. The location is west of Sombrero Light in 105 feet of water. (I’ve been assured that any local tackle shop owner can give me exact coordinates).

Yellowtail, mutton snapper, and amberjack can be caught year round. In July, I’ve been told that permit abound. I cannot wait to change out my Mercury oil, add some fuel, and hit the open water. I can almost taste the yellowtail already.

Did you like this? Share it:

Evinrude E115

Think of the Evinrude E115 as a souped up 90. The short stroke motor likes to rev and makes a formidable growl for a motor that weighs in at only 349 lbs. It’s the little engine that could in terms of how fast it can accelerate, but when it comes to top speeds, it cannot compete on the same level as the big guys like the Mercury 115.

What it lacks in speed, the Evinrude E115 makes up for in clean-running. It uses a DFI system that atomizes fuel under pressure and injects it directly into each cylinder. This means there is no visible smoke and no plug fouling. Just make sure to keep it that clean with Evinrude XD100 oil.

Did you like this? Share it:

Ready To Retire?

Overall, I think our extended vacation did us a world of good. I learned a lot about how I really like to spend my time. I also learned that I don’t want to retire any time soon – or at all.

I anticipate that I’ll always want some sort of work to keep me busy. Maybe instead of working a traditional 9-5 job indefinitely, I’ll take on some part time work. Who knows – maybe I’ll set up shop as an Evinrude oil salesman? That seems right up my alley.

Did you like this? Share it:

California Adventure

The first part of our extended vacation we spent in San Francisco. My wife and I both have family in the area. We took two days to see the most touristy attractions – Alcatraz, Pier 39, Fisherman’s Wharf and more.

While we were on Alcatraz – which is actually a quite beautiful island despite its grim history – I kept finding myself staring out at the water watching the boats go by. The few days we were in town were unseasonably warm and sunny, so you could tell all the boaters were taking full advantage. Much to my wife’s annoyance, I stopped to talk with some boaters while we were walking around the marina. I wound up discussing the ins and outs of OptiMax oil with one guy. When you have a common interest like boating you can make friends anywhere!

Did you like this? Share it:

Advantages of Mercury OptiMax Oil

What are some of the advantages of using Mercury OptiMax oil? The obvious answer is that the oil was specifically designed for use with the high performing OptiMax outboard engine. To expand on the response: the elite OptiMax outboard puts more strain on lubricants than the average oil can handle.

Typical two-stroke engine oils cannot cope with the hotter operating temperatures and reduced oiling rates of DI engines. Mercury OptiMax oil has additives that give extra protection. In other words, if you want your OptiMax engine to run efficiently, then you need to use Mercury OptiMax oil.

Did you like this? Share it:

Breaking in an OptiMax Outboard

Breaking in a new outboard engine can be a daunting task. You want to be sure that the task is completed correctly in order to ensure optimal performance and longevity of the outboard. Before you begin breaking in a new outboard engine, particularly an OptiMax outboard, be sure to read through the Operation, Maintenance & Warranty manual.

Generally, keeping the throttle wide-open or idling for any length of time is to be avoided during the first two hours of use. In older two-stroke models, the process of breaking in required extra oil, but the OptiMax engines use specific computer programming to increase the oil mixture during the breaking-in process. In order for the computing to work, you first need to be sure that you have the appropriate amount of Mercury OptiMax oil in place.

Did you like this? Share it:

Benefits of Outboard Motor Mount

Today I’ll be writing about the many benefits of using an outboard motor mount. Though motor mounts are not necessary, I find that they provide several benefits in the areas of acceleration, handling, and onboard space. That’s perhaps why some boat companies are incorporating mounts into the hull design of outboard motor boats.

In terms of acceleration, a motor mount moves the motor and propeller away from the hull’s current, thus the propeller can move calm water, which in turn provides greater acceleration and fuel efficiency. An outboard motor mount moves back the boat’s center of gravity, which also provides for faster movement through the water. Finally, the mount frees up space in the hull that would ordinarily be infringed upon. When you’re done looking over bulk outboard motor oil, I highly suggest you pick up an outboard motor mount.

Did you like this? Share it:

Starting an Outboard Motor

Yesterday, as the kick off for Refresher Week, I wrote a brief post about storing bulk oil. Today I’m specifically posting for boating beginners by covering how to start an outboard motor. Now, if you seasoned boaters are laughing, keep in mind that learning how to master an outboard is no easy task. Here are some step by step directions:

Start by facing the motor and checking to see if the motor back is in the locked up position. If it is, proceed by opening the tank vent and then moving the gearshift lever to neutral. Next, set the choke between half and full, adjust the throttle to start, and prime the fuel system until it feels firm. Now, pull the starter chord (or press the starter button if you have an electric starter). Reduce the choke and throttle once the motor gets going.

Did you like this? Share it:

Refresher Week

This week I’ve dubbed “Refresher Week.” I’ll be answering a number of questions that are frequently posed to me by friends and boating enthusiasts alike. You might read a post and think, “Well, that’s a no brainer.” Please bear in mind that we were all beginners once.

Today’s topic is: How to store bulk motor oil. Personally, I always buy my oil in bulk because it’s a true costs saver. The first thing I do when I receive my shipment of bulk motor oil is to check the drum for any leaks or weaknesses. If I notice any dings, I have a reserve drum that I can transfer the contents of the damaged drum into. Next, I move the drum into a safe, dry area that will be well protected from the elements and from extreme temperatures which can affect the oil’s viscosity.

Did you like this? Share it:

Deer Harbor

Another region of the San Juan Islands I love to explore by boat is Deer Harbor. The harbor is part of an unincorporated community on Orcas Island. Like the other San Juan Island communities I’ve described, the area is a hotbed for kayaking, whale watching, and fishing. The area is also known for its plentiful Dungeness crab, rock crab, and shrimp.

My wife and I particularly like boating in Moran State Park. The views of Mount Constitution are just tremendous. I would highly recommend breaking out your best outboard motor oil and heading over to Deer Harbor for a weekend of waterfront fun.

Did you like this? Share it:

Pig War

Did you know that the U.S. once had a stand-off with Great Britain over a pig? That’s stretching the truth a little bit, but the only casualty of the Pig War was a pig. Essentially, there was a longstanding border dispute between the U.S. and British Canada regarding the San Juan Islands. Obviously each side sought control over the archipelago.

The U.S. favored the western border of the Haro Strait while the British favored the eastern Rosario Strait. The conflict was not resolved until a pig wandered over to the American side of the island and ate the potatoes of a farmer. The farmer retaliated and killed the pig. The British authorities tried to get involved and arrest the American, but the American settlers called in for back up. Eventually, an international arbiter was called in and ultimately sided with the U.S. Think about that next time you’re loading you boat up with amalie oil to go boating around the San Juan Islands!

Did you like this? Share it:

Friday Harbor

The county seat of the San Juan Islands is Friday Harbor. It has a rich maritime history and it remains an active commercial fishing port. The downtown area is quite pleasant with a plethora of shops, galleries, and restaurants. While I’m putting 2 stroke oil in my boat, my wife likes to take a walk in the local park or take in a summer series concert.

Kayaking and whale watching are also big in the area. Personally I have spotted the majestic creatures a half dozen times or so. Each sighting still takes my breath away.

Did you like this? Share it: