August, 2009 | Outboard Motor Oil - Part 2

Winterizing Your Boat

Winterizing Your Boat

In most parts of America, small boat owners should expect to get a few more good months out of their vessels before it’s time to look into winter storage options. And of course there are those who live in temperate climates where one can enjoy boating all year round. For those who need to close down shop for the winter, however, there are a number of crucial maintenance measures that need to be put into place.

Assuming that the boat’s outboard motor has been kept in tip-top shape with Evinrude XD100 oil or some similar product, the following steps should be simple and painless. The first point to address is condensation that can build up in fuel lines during the winter. In order to prevent this from occurring, fill the gas tank completely and add a fuel stabilizer. Then start the motor and allow it to run for a few minutes so that the fuel and stabilizer can filter through the system.

Next, you’ll need to apply fogging oil to the carburetor. Just before the boat is put into storage, spray the fogging oil into the cylinders. Take the opportunity to scour the housing and then apply anti-corrosion spray to the electrical wires and connections. Once this is done you can focus on traditional methods of cleaning – spraying your boat down and waxing the exterior if desired. Don’t forget to disconnect the battery as well. If you don’t recharge it every month or so during the winter you’ll need a new battery by springtime.

Did you like this? Share it:

Evinrude through the Ages

Evinrude through the Ages

Yesterday’s post highlighted the inventive nature of outboard motor innovator Ole Evinrude. Today, let’s take a look at a few trials and tribulations the Evinrude company has faced throughout its long and storied history. The company’s first major competitor, Johnson Motors, got its start in a Terre Haute, Ind., garage. Johnson focused its attention on planes and boats, releasing the world’s first heavy outboard engine in 1926. The stock market crash hit Johnson especially hard, and Evinrude managed to buy up controlling shares of the company. The Outboard Marine and Manufacturing Corporation, or OMC, was born.

Business boomed during most of the rest of the 20th century, but things took a turn for the worse in 2000. With flagging sales and an inability to cope with increasingly strict environmental standards, OMC announced bankruptcy. That’s where Bombardier Recreational Products came in. The Canadian company purchased the Evinrude and Johnson brands and strove to uphold their proud tradition. The company has continued to produce high-quality Evinrude XD100 oil among many other products for boating enthusiasts.

Did you like this? Share it:

Spirit of Invention

Spirit of Invention

Innovation is almost always born out of necessity. History’s great tinkerers and inventors used the limited knowledge at their disposal to solve modern problems. And we in turn reap the benefits of those breakthroughs. The work of boat engine mogul Ole Evinrude is a perfect example. One hundred years ago this month, Evinrude changed the American boating landscape by inventing what is now called the outboard motor.

In August of 1909, Ole Evinrude wasn’t exactly a household name. He had distinguished himself as a machinist while employed for a number of machine tool companies in the Midwest, but he probably would have never dreamed of attaining fame in the boating world. On a fateful August day, Evinrude was enjoying a picnic with his girlfriend on a small island in the middle of a lake. The girl suddenly mentioned her hankering for ice cream, and Evinrude was eager to please. He rowed across the lake to an ice cream shop, bought the confection and turned back.

Before he reached the island, however, the ice cream had melted in the sun. This gave him an idea: Why not attach a motor that would propel his boat without the need for rowing? From there, Evinrude began to tinker until he came up with a workable model. He wouldn’t approve an engine design unless it worked perfectly. This attitude has remained an integral part of the company a century later. The Evinrude brand has expanded to include a variety of specialized engines, tools, and high-quality 2-cycle oil such as Evinrude XD100 oil. There’s no telling what innovations the next 100 years will bring.

Did you like this? Share it:

Considering Boat Insurance

Considering Boat Insurance

As summer begins to wind down, many boat owners begin taking stock of their vessel – seeing to any late-season repairs and making plans for the offseason. In the wake of a recent rash of outboard motor thefts in the Florida Keys, boat owners are taking extra care to ensure that their investments remain protected for the years to come. In many cases, this requires exploring the ins and outs of boat insurance.

It’s a common misconception that boat insurance covers the craft exclusively. Depending on the plan, boat owners can cover practically any unfortunate eventuality. The most basic plans cover collision damages, fire and lightning. Beyond that, most plans also protect against the threat of vandalism and theft. But that’s just the tip of the proverbial iceberg. Many policies extend far beyond the boat itself to cover machinery, outboard motors, boat trailers and personal property that may be attached.

Now that August has arrived and many seasonal boat operations will be ceasing within a few months, it’s as good a time as any to assess the state of your small boat. Whether or not you invest in an insurance plan, it’s always a good idea to keep your boat and its components well maintained. Providing the motor with satisfactory lubrication – as provided by Mercury engine oil – can effectively extend its life. That means more time to have fun in the sun.

Did you like this? Share it:

Dealing with Saltwater Corrosion

Dealing with Saltwater Corrosion

For those who make a habit of using their small boats in salt water, a unique problem begins to crop up. Although most quality outboard motors are built to run in any water conditions, they become susceptible to the effects of wind and weather over time. Even if your engine is initially protected by a few coats of primer and paint, the elements have a way of getting through. Despite your best efforts at keeping an engine running smooth with Yamaha 2m oil, there are other factors that also must be considered.

Now that summer is beginning to wind slowly to a close, it’s a good time to check your outboard for outward appearances of wear. Saltwater corrosion starts as an aesthetic problem, but it can spiral into a mechanical one in no time. Take a close look at the paintwork, inspecting for blisters or bubbles. You might notice that some of these irregularities are solid, and others have burst to emit slight trails of whitish aluminum oxide.

In order to remedy this problem you’ll need to remove the engine and place it on dry land. Using a degreasing agent, remove all traces of dirt. After it dries, take an electric drill and a heavy brush and eliminate any flaking paint, rust and salt deposits from the engine’s surface. Fill in any dents or dings with putty, and then sand the result until it appears consistent. Finish by adding primer and final coats of paint.

Did you like this? Share it:

Keep an Eye on Your Outboard

Keep an Eye on Your Outboard

A recent influx of outboard motor thefts in the Florida Keys has served to remind boaters to remain vigilant on dry land. According to the Miami Herald, bandits have been targeting high-quality Mercury and Yamaha outboards. In this calendar year alone, there have been 53 cases of marine engine theft, and the vast majority of them have gone unsolved.

Officers working on the cases have said that the robbers are anything but brazen; in fact they have been known to strike only when a motor is left unattended and readily accessible. It stands to reason, then, that small boat owners would benefit by storing their boats in garages after use, or, in some cases, detaching the motor and stowing it away inside. It’s not unusual for the motor to be far and away the most valuable part of a boat, and crooks are not ignorant of that fact.

Although this problem has been particularly rampant in Florida, it’s important for all owners of small craft to remain alert. It’s best to think of outboard engine security as simply another facet of day-to-day maintenance. Just as you would provide your engine with quality boat motor oil to keep it running strong and smooth, you should keep an eye on your outboard.

Did you like this? Share it:

Electric Outboards: Are They Worth the Hype?

Electric Outboards: Are They Worth the Hype?For several years now, many small boat owners have been hearing whispers about electric outboards. These engines are supposed to be the wave of the future, but do their benefits truly outweigh their detriments? When you hear someone trumpeting the use of an electric outboard, they tend to bring up environmental impact first. Let’s explore these and other issues by comparing electric motors to traditional petroleum-fueled outboards.

Bear in mind that there are always going to be tradeoffs associated with electric engines. They might be compact, but they require a heavy battery that can weigh your craft down significantly. On the face of it, electric motors might appear to be more eco-friendly than an engine that requires two cycle oil. This is not actually the case, however. When it comes time to charge the battery, how long will you need to run the engine? Any environmental benefits are therefore negligible, at least for now.

Electric engines also limit the speed and mobility of a small vessel. If you’re accustomed to motoring around a lake with quickness and efficiency, electric is probably not the way to go. Returning to the question of environmental friendliness, don’t forget that 2-cycle engines have improved by leaps and bounds in that department within the last few years. Most major outboard brands meet and exceed efficiency standards set by the Environmental Protection Agency.

Did you like this? Share it:

Evinrude Anglers Excel at Fishing Tournament

Evinrude Anglers Excel at Fishing Tournament

It’s not an uncommon sight when the Evinrude professional anglers sweep a fishing tournament or manage to take more than half of the top spots. Evinrude professional anglers are assisted in all their fishing endeavors by the amazing Evinrude E-TEC outboard engines, which are supported by certified Evinrude mechanics and Evinrude outboard oil.

The Evinrude E-TEC engine has several benefits over the standard outboard motor. For one, the E-TEC is a great deal quieter than other outboard motors, allowing fisherman to sneak up on fish without alerting of their presence. The E-TEC engines are also cleaner engines that keep lakes, oceans, and rivers free from pollutants. The E-TEC engine is also resilient to weather and atmospheric conditions, boasting top performance in both biting cold and blazing heat. E-TEC outboard engines are often amongst the most popular used in fishing tournaments around the world, and with good reason.

Did you like this? Share it:

Cleaner Outboards Down Under?

Cleaner Outboards Down Under?

Last week, we took an extensive look at the Environmental Protection Agency’s call for an increased ethanol presence in domestic outboard fuel. In the wake of this news, motor manufacturer BRP Evinrude has proposed that Australia adopt America’s current outboard emission standards. If implemented, the plan would ban importation of high-emission technology engines as early as next year.

Australia has been notoriously lax about regulating non-road engines, but there has been a clamor of late down under to improve air and water quality. Many older non-compliant two-stroke engines are high polluting, according to Evinrude, and they are costing the country’s health industry billions of dollars. Environmental concerns have achieved a new level of awareness in Australia following a 270-ton oil spill off the coast of Brisbane.

If passed, the proposed regulations would copy the EPA 2009 emissions limits and testing procedures. Newer outboards manufactured by such companies as Yamaha, Evinrude and Mercury comply with these standards and use efficient, eco-friendly boat motor oil. If the Australian government decides to adopt these standards, it will set an interesting precedent for outboard fuel discussions in the U.S.

Did you like this? Share it: