Evinrude oil | Outboard Motor Oil - Part 24

Winterizing Your Boat: Part Two

The first step when preparing your boat for the frigid winter months is to find a suitable storage area. While leaving your boat in the water is an option, it isn’t advisable; the water will cause unnecessary wear and corrosion to the prop and the hull. The ideal location is in a covered, climate-controlled area. If you have extra space in your garage, you’re in luck; otherwise, you’ll want to invest in a storage space.

As with all maintenance, each manufacturer has their own specifications, so you’ll want to consult your owner’s manual to make sure you abide by their guidelines. For outboard engine owners, you’ll want to run the engine to warm it up and then change the Evinrude XD100 oil prior to putting the vessel in storage. This is also a good time to change the oil filters and flush the system with water. Whether you have a two- or a four-stroke, you’ll want to get rid of all of the excess fuel prior to storage, as it will go bad if it just sits in the tank for months.

Did you like this? Share it:

Boat Ownership: Part Five

Once you’ve made the decision to purchase a boat, you obviously want to protect your investment. We all recognize that the water and other elements provide a constant threat to our boat, which is why we invest in bumpers, covers and other protective gear. But what about boat theft?

It’s not the end of the world if someone swipes the Evinrude XD 100 out of the boat or grabs a stray life jacket, but full-blown boat theft is becoming increasingly common. Boats look like easy targets for criminals, especially when they’re just sitting there on a trailer. The easiest way to prevent theft is by locking your trailer at all times and keeping the keys on your person when you are moored at the dock. Also be sure to clearly label your boat, trailer and all of the removable equipment with your HIN and driver’s license number.

Did you like this? Share it:

Boat Ownership: Part Two

When most people begin to contemplate purchasing a watercraft, they have a particular use in mind. Perhaps it’s pulling waterskiers, wakeboarders or innertubers. Or you might simply want a place to sit out in the middle of the lake casting your fishing line. Maybe you want the best of both worlds. It’s important to hash out how you plan to use your boat, as this will dictate the type of craft you need.

If you are only going to be trolling around a small body of water, a modest craft with a is all you need. Of course, the larger your vessel the more it’ll cost and the harder it will be to maintain it; you’ll have to pay more for fuel, Evinrude XD100 oil and even to keep it in storage. This is why I suggest getting the smallest vessel that will still do everything you need it to.

Did you like this? Share it:

The Anatomy of the Two-Stroke Engine: Part Five

Now that you’re well acquainted with the two-stroke cycle and its advantages, it’s time to look at the downside—because let’s be honest, there’s always a downside.  Here are a few reasons we don’t see the two-stroke engine used in automobiles and for other large-scale applications:

~Longevity: the fact that you have to mix the Evinrude XD 100 oil with the gasoline means that there isn’t a direct means of lubrication to the system, which leads to expedited wear and tear.

~Efficiency: two-stroke oil can be expensive, and the engine guzzles it up. As an example, you would use about one gallon of oil every 1,000 if there were a two-stroke engine in your car. You’d also notice a decrease in your gas mileage.

~Pollution: as stated above, two-stroke engines burn a lot of oil, equating to a lot of pollution.

Did you like this? Share it:

Basic Outboard Maintenance: Part Five

We still have at least of few weeks of boating season left, but I figured it was important to discuss how to winterize and prepare your outboard motor for storage. It’s essential to take the proper precautions when  to ensure it starts up easily next spring. Before your last outing of the season, add some fuel conditioner to your mix of fuel and Evinrude XD 100 oil.

Always drain the system of all the gas and oil before putting the boat into storage, as the fuel will go bad if it just sits for months. If your lower unit calls for periodic lubrication changes, this is the time to do it. Look over the entire motor to ensure all of the bolts and fittings are in place and taut. Finally, put the motor in a dry place and keep it well covered, as small animals love to nest up in the crevices during the winter.

Did you like this? Share it:

Basic Outboard Maintenance: Part Two

Immediately following every outing you should run through a short checklist to ensure your motor wasn’t damaged and will be ready for your next outing. The first line of business is to flush the engine. For this you’ll need a set of rabbit ears, which is a pair of rubber hoses connected by a metal clamp. The apparatus slips on to the lower unit where you can attach the garden hose.

When you’re flushing the engine, ensure that the water flowing through the system isn’t hot. If the water is hot or the flow is weak, it’s an indication that some debris is blocking the system. You can easily remove the blockage by inserting a small piece of wire into the flow tube. Once the engine has been flushed, spray down everything with some lubricant. Finish by topping off your tank with a mixture of fuel and Evinrude XD100.

Did you like this? Share it:

Ole Evinrude: Father of the Outboard Motor

Ole Evinrude was born in Norway’s capital city of Oslo in 1877 but immigrated to the US with his family five years later. During his adolescence, Ole was sent to work in machinery stores and to teach himself engineering. He evolved into a machinist and worked at various firms around the Midwest.

Ole went into business for himself in 1900, and by 1907, he had built the first outboard motor. That original model was forged from brass and steel with a crank to get the two-cycle engine going. The business’ growth was steady after the conception of the motor until 1919, when Ole improved on his design, sold his stake in the old company and started anew. The Evinrude name has reached legendary proportions in the boating industry, and you’ll still find it plastered on everything for two-cycle motors to Evinrude XD100 oil.

Did you like this? Share it:

What Makes Some Synthetics Better?

When you’re buying oil and comparing Evinrude XD 100 and XD 50, do you really know what the difference is? The XD100 is more expensive, so it’s fairly obvious that it is superior in some way. Virtually all synthetics start with the same base structure, especially variants of the same manufacturer. The difference is in the additives.

Oils that are more expensive contain more additives, which enhance the performance of your engine. While standard grade oil will provide lubrication and protect your engine, premium oils work to eliminate ash, smoke and odor too. They also can improve the longevity of your motor.

Did you like this? Share it:

Mixing Gas and Outboard Motor Oil

Some people see mixing outboard motor oil and gasoline as a chore, but I actually prefer it. It beats having to change the oil the traditional way twice a year, in my opinion at least. Each two-stroke engine specifies a different fuel to oil ratio, so be sure to consult your owner’s manual; when I mix in my Evinrude XD100, I use a 50:1 ratio.

To figure out the proper combination, you first have to convert everything to a common unit of measurement—ounces are the easiest. There are 128 ounces in a gallon. So lets say you are going to prepare 5 gallons of mixed fuel, which is equivalent to 640 ounces. Since I use a 50:1 ratio, I divide 640 by 50 to get 12.8—so I need 12.8 ounces of outboard motor oil.

Did you like this? Share it:

Why Use Premium Outboard Motor Oil?

Needless to say, some of my boating brethren don’t take outboard motor oil as seriously as I do. And that’s okay, because most people don’t. But if you own a vessel, investing in premium outboard motor oil is important. While all oils provide lubrication and help protect the engine, a premium synthetic blend drastically improves the overall performance of your craft.

Top tier oil, like Evinrude XD 100 oil, can be used in a range of boats: outboard engines, direct injection or oil injected. Two-stroke oils have a tendency to smoke and emit odors, but premium oil reduces the emissions from your engine and prolongs the motor’s life. And when your engine runs cleaner, acceleration is smoother and overall performance is better.

Did you like this? Share it:

How to Pull a Skier: Part Four

Now that I’m thinking about it, this portion of the series probably should have come first. Before the skier gets in the water, it’s important to go over some ground rules and establish an agreed upon form of nonverbal communication. The thumbs up or down are simple signals to indicate a desired increase or decrease in speed. A circle above your head is obviously a turn, while drawing your hand across your throat is a sign to “cut it.”

Always have an extra person onboard to watch the skier and raise the safety flag when they go down. Even if you have a spotter, installing a rearview mirror is never a bad idea. Last but not least, be sure you always have the proper supplies before you leave the dock: first aid equipment, tools, and extra gas and Evinrude XD100.

Did you like this? Share it:

Pulling a Water Skier: Part One

Boats are certainly fun to drive and it’s enjoyable to spend a day anchored in the middle of a serene lake, but one of the main reasons most people invest in a boat is water sports. And while towing an innertube is a cinch, getting a skier up—especially a novice—can be difficult. The boat driver has a crucial impact on the enjoyment and the safety of the skier, so before you put someone behind your boat, be sure you know what you’re doing.

When the skier is in the water, have the engine cut and someone else on board displaying your safety flag, which should always be kept with your extra gasoline and Evinrude XD 100. Once the skier has the handles of the towrope and is comfortable in the water, clear the rope from the propeller and start the engine. Slowly move away from the boater until all of the slack has been removed from the towrope. Tomorrow we’ll go over how to get them up.

Did you like this? Share it: