Ultimate Guide to Boat Motor Oil
Outboard oil for the boat isn’t similar to the oil which is used for the car engines. The auto engine is usually used on a daily basis while the outboard motor might sit free for several days. The 4 stroke oil is used for the boats that are kept in damp and salty environments contrary to a car. The ideal 4 stroke oil for the boats is Pennzoil 5063875 because its formula makes sure that the engine does run clean while running at varying temperatures. Also, a car has so many gears, which mean that it could cruise along in the overdrive at about 2,000 revs. But, the boat that is under load would be revved out a bit higher for long periods that means this needs more lubrication.
The outboard is not a little investment. Nowadays, engines are tuned intricately to run efficiently within very tough tolerances and most engineers formulate oil, especially to increase the performance and efficiency of the engines. This is the reason why oils that are formulated through the real equipment manufacturer are preferred. Also, Evinrude E-Tec is the cleanest and efficient burning outboard oil the Evinrude has made till date. The engines are also made for running on the XD100 oil. The E-Tec might be programed in order to run on the XD50. While programed in such manner, the consumption of oil would go up. Sometimes, owners see that the extra cost of XD100 oil is just offset by a decline in oil consumption. In case the E-Tec is to use the XD100, then don’t use XD50! It’s formulated just as the TC-W3 certified oil. It’s certified for the direct injection engines as well. This oil is the TC-W3 certified. It’s approved for the pre-mix applications. Mercury Optimax Outboards are also intended for performance and competence and is used in direct fuel injected engines which require special oil formulations.
Before the development of boat motor oil, it’s suggested that the Premium Plus will run in the Optimax outboards; however, it’s since altered to the high-quality Optimax Oil. The Premium Plus is formulated for the direct fuel injected engine. This also exceeds or meets all personal watercraft and outboard manufacturers’ recommendations to use the TC-W3 and TC-W2 in the direct injection two-cycle applications. This boat motor oil is surely one of the best oils available on the market. In addition, the instructions are very simple to understand for anyone who knows a little.